080M46 steel stockholders and suppliers from china. OTAI SPECIAL STEEL Supply in 080M46 steel round bar, plate, sheet, square bar, flat bar, pipe since 2007.our steel stock more 1000tons

BS 080M46 a high quality Medium Carbon Structural steel. BS 080M46 steel Annealing delivery hardenss less than 250HB.080M46 With a medium carbon content range.

Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4053 GB China steel standard

Form of Supply

BS 080M46 Carbon steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. BS 080M46 steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. 080M46 carbon steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.

steel factory

Chemical composition

C(％) 0.43～0.50 Si(％) 0.60～0.90 Mn(％) 0.60～0.90 P(％) 0.040 max
S(％) 0.050 max

Equivalent Of 080M46 Carbon Steel | flat steel bar

USA Germany China Japan France England Italy Poland ISO Austria Sweden Spain
ASTM/AISI/UNS/SAE DIN,WNr GB JIS AFNOR BS UNI PN ISO ONORM SS UNE
10456 / G080M460 C22E  Ck22 / 1.1151 45 S45C C45E / XC48  C40E  080M46 1660

Heat treatment Related

  • Annealing of 080M46 Carbon structural steel flat bar

Heat to 800°C – 850°C (1472°F – 1562°F)

Hold until the temperature is uniform

Cool in furnace.

  • Hardening of 080M46 Carbon structural steel flat bar

Heated slowly to 820°C – 850°C , Then after adequate soaking at this temperature quench in water and temper.. Temper as soon as tools reach room temperature.

  • Forged of 080M46 medium Carbon structural steel bar

Forged at forged temperature 850°C – 1250°C, normal small size steel bar and plate hot rolled is ok.

Mechanical Properties of BS 080M46 flat steel bar

The mechanical properties of annealed BS 080M46 carbon steel are outlined in the table below

Tensile strength σb (MPa): ≥600 (61)

Yield strength σs (MPa): ≥355 (36)

Elongation δ5 (%): ≥16

Reduction of area ψ (%): ≥40

Impact energy Akv (J): ≥39

Impact toughness αkv (J / cm2): ≥49 (5)

Hardness: no heat treatment, ≤229HB; annealed steel, ≤197HB

Sample size: Sample size is 25mm

Applications of medium carbon flat steel bar 080M46

BS 080M46 steel flat bar is widely used for all industrial applications requiring more wear resistance and strength. Typical applications as Gears   Pins   Rams

Shafts Rolls  Sockets Axles Spindles   Worms Bolts   Ratchets   Light gears Studs   Crankshafts   Guide rods Connecting rods  Torsion bars  Hydraulic clamps

Regular size and Tolerance of medium carbon 080M46 flat steel bar

Steel round bar: Diameter Ø 5mm – 3000mm

Steel plate/ steel flat bar: Thickness 5mm – 3000mm x Width 100mm – 3500mm

Steel Hexagonal bar: Hex 5mm – 105mm

Others 080M46 steel have not specified size, pls contact our experienced sales team.

Processing

BS 080M46 carbon steel round bar and flat sections can be cut to your required sizes. 080M46 carbon steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. BS 080M46 steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.

Contact our experienced sales team to help you with your 080M46 carbon steel questions and enquiry by Email or Telephone. The questions will be reply in 24 hours.

OTAI SPECIAL STEEL CO., LTD

Email: jack@otaisteel.com   TEL: 0086-769-33232622   FAX: 0086-769-88705839